Fluke 1760 [FLUKE-1760 TR US] Three-Phase Power Quality Recorder Topas with Fast Transient and 1000V Sensor

• Conduct tests according to stringent, international IEC 61000-4-30 Class-A standards
• GPS time synchronization correlates data with events or datasets from other instruments, with precision
• Flexible and fully configurable thresholds and scale factors allow users to pinpoint specific issues by defining detailed criteria for detection and recording of disturbances
• 600V CAT IV/1000V CAT III rated
• Uninterrupted power supply (40 minutes) records beginning and end of interruptions and outages
• 10 MHz, 6000 Vpk waveform capture gets a detailed picture, even short events
• 2 GB data memory enables detailed, simultaneous recording of numerous power parameters for long periods of time
• Comprehensive software provides trend diagrams for root cause analysis, statistical summaries, report writing and real-time data monitoring (in online mode)
• [Plug and play allows quick setup with automatic sensor detection; sensors are instrument powered, eliminating need for batteries]
• Insulated housing and solid state design with no rotating components enables reliable testing under nearly any conditions

• General
• Warranty 2 years
• Quality system Developed and manufactured as per ISO 9001: 2000
• Reference conditions Environment temp.: 23 °C ± 2 °C (74 °F ± 2 °F)
• Power supply: 230 V ± 10 %
• Power frequency: 50 Hz/60 Hz
• Signal: declared input voltage Udin
• Averaging: 10 minute intervals
• Intrinsic uncertainty All specified intrinsic uncertainties are valid under these reference conditions
• Display The Fluke 1760 features LED indicators for the status of the 8 channels, phase sequence,
• power supply (mains or battery), memory usage, time synchronization, and data transfer.
• Power LED Permanent light: normal power supply from mains
• OFF: supply via internal battery in case of a power failure
• Channel LEDs 3-color LEDs per channel for:
  
• overload condition
  
• under load condition signal level in nominal range
• Data memory 2 GB flash memory depending on model
• Memory model Linear
• Interfaces Ethernet (100 MB/s), RS 232, external modem via RS 232
• Baud rate for RS 232 9600 Baud to 115 kBaud
• Dimensions (H x W x D) 325 mm x 300 mm x 65 mm (13 in x 11.8 in x 2.6 in)
• Weight (without accessories) appr. 4.9 kg (10.8 lb)
• Calibration interval 1 year recommended for Class-A, otherwise 2 years
• Ambient conditions
• Working temperature range -20 °C to 50 °C (-4 °F to 122 °F)
• Storage temperature range -20 °C to 60 °C (-4 °F to 140 °F)
• Reference temperature 23 °C ± 2 °C (74 °F ± 2 °F)
• Climatic class B2 (IEC 654-1), -20 °C to 50 °C (-4 °F to +122 °F)
• Max. operating altitude 2000 m: max. 600 V CAT IV*, power supply: 300 V CAT III
  
• 5000 m: max 600 V CAT III*, power supply: 300 V CAT II
  
• *depending on sensor
• Housing insulated, robust plastics housing
• EMC
• Emission Class-A as per IEC/EN 61326-1
• Immunity IEC/EN 61326-1
• Power supply
• Range AC: 83 V to 264 V, 45 to 65 Hz
• Safety DC: 100 V to 375 V IEC/EN 61010-1 2nd edition 300 V CAT III
• Power consumption max. 54 VA
• Battery pack NIMH, 7.2 V, 2.7 Ah In case of a power supply failure an internal battery maintains the supply for up to 40 minutes. Afterwards, or in case of discharged battery the Fluke 1760 is turned off and continues the measurements with the latest settings as soon as the supply voltage returns. The battery can be replaced by the user.
• Signal conditioning
• Range for 50 Hz systems 50 Hz ± 15 % (42.5 Hz to 57.5 Hz)
• Range for 60 Hz systems 60 Hz ± 15 % (51 Hz to 69 Hz)
• Resolution 16 ppm
• Sampling frequency for 50 Hz power frequency 10.24 kHz, The sampling rate is synchronized to mains frequency.
• Uncertainty for frequency measurements < 20 ppm
• Uncertainty of internal clock < 1s/day
• Measurement intervals Aggregation of the interval values as per IEC 61000-4-30 Class-A
• Min-, Max-values Half cycle, e.g.: 10 ms rms values at 50 Hz
• Transients Sample rate 100 kHz to 10 MHz per channel
• Harmonics as per IEC 61000-4-7:2002: 200 ms
• Flicker as per EN 61000-4-15:2003: 10 min (Pst), 2 h (Plt)
• Measurement inputs
• Number of inputs 8 galvanically isolated inputs for voltage and current measurements
• Sensor category rating up to 600 V CAT IV depending on sensor
• Basic category rating 300 V CAT III
• Nominal voltage (rms) 100 mV
• Range (peak value) 280 mV
• Overload capacity (rms) 1000 V, continuously
• Voltage rise rate max. 15 kV/µs
• Input resistance 1 MΩ
• Input capacitance 5 pF
• Input filter Each channel is equipped with a passive low-pass filter, an anti-aliasing filter and a 16-bit A/D converter. All channels are sampled synchronously with a common quartzcontrolled clock pulse. The filters achieve extremely high accuracy throughout a wide frequency range. The filters protect against voltage transients and, limit the signal rise rate, reduce high frequency components and especially the noise voltage above half the sampling rate of the A/D converter by 80 dB. This is also valid under extreme operating conditions such as transient voltages at the output of converters.

• (1) 2GB Internal Flash Memory Card
• (1) PQ Analyze Software CD
• (1) Ethernet Cable
• (1) Crosslink Ethernet Cable
• (1) Mains Cable
• (1) Carrying Case/Bag
• (4) Voltage Probes (600V for INTL Set, 1000V for US Set)
• (4) Dual-Range Flexible Current Probes 1000A/200A AC
• (1) GPS Time Sync Receiver
• (1) User Manual

Brochure/Datasheet

Instruction manual

Download

Note: Prices are not binding , subject to change without prior notice